VORTEX UNO 600

Production capacity:600 tiles/ hour

VORTEX UNO 600 VORTEX UNO 600

Vortex Uno 600 has an automatic production cycle, The extruder has a push-button to start the production cycle ending with the pneumatic cut. Sand, cement and colour are loaded in the mixer skip, automatically mixed and fed to the extruder by a mix feeding conveyor. The remaining operations are similar to those of UNO300, and it can be also upgraded to vortex UNO900 .With this configuration, if required, the round cutting is possible. The daily production can be doubled with a heat generator and all the pertinent apparatuss for curing. The slurry and the acrylic units are optionals.

15 boiler(optional) 15、锅炉
14 pigment bags stock 14、颜料储存处
13 cement bags stock 13、水泥储存处
12 sand stock 12、沙子储存处
11 rack for ridges 11、脊瓦养护架
10 pallet for cured tiles 10、带铝托板的屋面瓦
9 depalleting table 9、托板分离台
8 curing chambers 8、养护室
7 transpallet 7、液压手推车
6 rack for tiles 6、屋面瓦养护架
5 slurry applicator(optional) 5、水泥浆喷淋器
4 conveyor with mix feeding hopper 4、带传送带的混凝土喂料斗
3 automatic mixer 3、自动搅拌机
2 power and control unit 2、电控柜
1 Extruder"Uno 600" 1、Uno 600 挤出机
VORTEX UNO 600